Simulated and measured results from a duroid-based planar MBG cavity resonator filter

Michael J. Hill; Richard W. Ziolkowski; John Papapolymerou

doi:10.1109/75.895092

Simulated and measured results from a duroid-based planar MBG cavity resonator filter

Michael J. Hill, Richard W. Ziolkowski, John Papapolymerou

Electrical and Computer Engineering

Research output: Contribution to journal › Article › peer-review

41 Scopus citations

Abstract

A planar Microwave Band Gap (MBG) cavity resonator filter that is completely compatible with current commercial printed circuit board (PCB) fabrication techniques has been designed, fabricated and tested. This filter provides a 1.33% band-width passband response at 10.67 GHz with a corresponding insertion loss of 2.17 dB. Design considerations and equations are presented which demonstrate that the resonant frequency and Q of the resonator can be adjusted as desired.

Original language	English (US)
Pages (from-to)	528-530
Number of pages	3
Journal	IEEE Microwave and Wireless Components Letters
Volume	10
Issue number	12
DOIs	https://doi.org/10.1109/75.895092
State	Published - Dec 2000

Keywords

MBG cavity resonator
Planar high Q filter

ASJC Scopus subject areas

Condensed Matter Physics
Electrical and Electronic Engineering

Access to Document

10.1109/75.895092

Cite this

@article{c34b37f0fedb47febda5ebedcfb2b125,

title = "Simulated and measured results from a duroid-based planar MBG cavity resonator filter",

abstract = "A planar Microwave Band Gap (MBG) cavity resonator filter that is completely compatible with current commercial printed circuit board (PCB) fabrication techniques has been designed, fabricated and tested. This filter provides a 1.33% band-width passband response at 10.67 GHz with a corresponding insertion loss of 2.17 dB. Design considerations and equations are presented which demonstrate that the resonant frequency and Q of the resonator can be adjusted as desired.",

keywords = "MBG cavity resonator, Planar high Q filter",

author = "Hill, {Michael J.} and Ziolkowski, {Richard W.} and John Papapolymerou",

note = "Funding Information: Manuscript received August 25, 2000; revised September 28, 2000. This work was supported in part by the Air Force Office of Scientific Research, Air Force Material Command, USAF under Grant F49620-96-1-0039, and in part by the NSF-S/IUCRC Center for Low Power Electronics (CLPE) under Grant EEC-9523338.",

year = "2000",

month = dec,

doi = "10.1109/75.895092",

language = "English (US)",

volume = "10",

pages = "528--530",

journal = "IEEE Microwave and Wireless Components Letters",

issn = "1531-1309",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "12",

}

TY - JOUR

T1 - Simulated and measured results from a duroid-based planar MBG cavity resonator filter

AU - Hill, Michael J.

AU - Ziolkowski, Richard W.

AU - Papapolymerou, John

N1 - Funding Information: Manuscript received August 25, 2000; revised September 28, 2000. This work was supported in part by the Air Force Office of Scientific Research, Air Force Material Command, USAF under Grant F49620-96-1-0039, and in part by the NSF-S/IUCRC Center for Low Power Electronics (CLPE) under Grant EEC-9523338.

PY - 2000/12

Y1 - 2000/12

N2 - A planar Microwave Band Gap (MBG) cavity resonator filter that is completely compatible with current commercial printed circuit board (PCB) fabrication techniques has been designed, fabricated and tested. This filter provides a 1.33% band-width passband response at 10.67 GHz with a corresponding insertion loss of 2.17 dB. Design considerations and equations are presented which demonstrate that the resonant frequency and Q of the resonator can be adjusted as desired.

AB - A planar Microwave Band Gap (MBG) cavity resonator filter that is completely compatible with current commercial printed circuit board (PCB) fabrication techniques has been designed, fabricated and tested. This filter provides a 1.33% band-width passband response at 10.67 GHz with a corresponding insertion loss of 2.17 dB. Design considerations and equations are presented which demonstrate that the resonant frequency and Q of the resonator can be adjusted as desired.

KW - MBG cavity resonator

KW - Planar high Q filter

UR - http://www.scopus.com/inward/record.url?scp=0034474780&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0034474780&partnerID=8YFLogxK

U2 - 10.1109/75.895092

DO - 10.1109/75.895092

M3 - Article

AN - SCOPUS:0034474780

SN - 1531-1309

VL - 10

SP - 528

EP - 530

JO - IEEE Microwave and Wireless Components Letters

JF - IEEE Microwave and Wireless Components Letters

IS - 12

ER -

Simulated and measured results from a duroid-based planar MBG cavity resonator filter

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this