Run-length-limited low-density parity check codes based on deliberate error insertion

Bane Vasic; Karunakar Pedagani

doi:10.1109/TMAG.2004.826904

Run-length-limited low-density parity check codes based on deliberate error insertion

Bane Vasic, Karunakar Pedagani

Research output: Contribution to journal › Article › peer-review

36 Scopus citations

Abstract

We propose a novel approach to modulation and error control coding. The idea is to completely eliminate a constrained encoder and, instead, impose the constraint by the deliberate introduction of bit errors before transmission. The redundancy that would have been used for imposing the constraint is used in our scheme to strengthen the error control code (ECC), in such a way that the ECC becomes capable of correcting both deliberate errors as well as channel errors that occur during the detection. Our ECC-modulation scheme is based on iterative decoding of low-density parity check codes and a run-length constraint.

Original language	English (US)
Pages (from-to)	1738-1743
Number of pages	6
Journal	IEEE Transactions on Magnetics
Volume	40
Issue number	3
DOIs	https://doi.org/10.1109/TMAG.2004.826904
State	Published - May 2004

Keywords

Combined constrained and error control coding
Low-density parity check codes
Modulation coding
Run-length-limited constraint

ASJC Scopus subject areas

Electronic, Optical and Magnetic Materials
Electrical and Electronic Engineering

Access to Document

10.1109/TMAG.2004.826904

Cite this

@article{af7b8d11c6794ccb97e113f7707eb0fc,

title = "Run-length-limited low-density parity check codes based on deliberate error insertion",

abstract = "We propose a novel approach to modulation and error control coding. The idea is to completely eliminate a constrained encoder and, instead, impose the constraint by the deliberate introduction of bit errors before transmission. The redundancy that would have been used for imposing the constraint is used in our scheme to strengthen the error control code (ECC), in such a way that the ECC becomes capable of correcting both deliberate errors as well as channel errors that occur during the detection. Our ECC-modulation scheme is based on iterative decoding of low-density parity check codes and a run-length constraint.",

keywords = "Combined constrained and error control coding, Low-density parity check codes, Modulation coding, Run-length-limited constraint",

author = "Bane Vasic and Karunakar Pedagani",

note = "Funding Information: Manuscript received February 26, 2003; revised February 18, 2004. This material is based upon work supported by the National Science Foundation under Grant CCR-0208597, and by Seagate Technology. The authors are with the Department of Electrical and Computer Engineering, University of Arizona, Tucson, AZ 85718 USA (e-mail: [email protected]. edu; [email protected]). Digital Object Identifier 10.1109/TMAG.2004.826904",

year = "2004",

month = may,

doi = "10.1109/TMAG.2004.826904",

language = "English (US)",

volume = "40",

pages = "1738--1743",

journal = "IEEE Transactions on Magnetics",

issn = "0018-9464",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "3",

}

TY - JOUR

T1 - Run-length-limited low-density parity check codes based on deliberate error insertion

AU - Vasic, Bane

AU - Pedagani, Karunakar

N1 - Funding Information: Manuscript received February 26, 2003; revised February 18, 2004. This material is based upon work supported by the National Science Foundation under Grant CCR-0208597, and by Seagate Technology. The authors are with the Department of Electrical and Computer Engineering, University of Arizona, Tucson, AZ 85718 USA (e-mail: [email protected]. edu; [email protected]). Digital Object Identifier 10.1109/TMAG.2004.826904

PY - 2004/5

Y1 - 2004/5

N2 - We propose a novel approach to modulation and error control coding. The idea is to completely eliminate a constrained encoder and, instead, impose the constraint by the deliberate introduction of bit errors before transmission. The redundancy that would have been used for imposing the constraint is used in our scheme to strengthen the error control code (ECC), in such a way that the ECC becomes capable of correcting both deliberate errors as well as channel errors that occur during the detection. Our ECC-modulation scheme is based on iterative decoding of low-density parity check codes and a run-length constraint.

AB - We propose a novel approach to modulation and error control coding. The idea is to completely eliminate a constrained encoder and, instead, impose the constraint by the deliberate introduction of bit errors before transmission. The redundancy that would have been used for imposing the constraint is used in our scheme to strengthen the error control code (ECC), in such a way that the ECC becomes capable of correcting both deliberate errors as well as channel errors that occur during the detection. Our ECC-modulation scheme is based on iterative decoding of low-density parity check codes and a run-length constraint.

KW - Combined constrained and error control coding

KW - Low-density parity check codes

KW - Modulation coding

KW - Run-length-limited constraint

UR - http://www.scopus.com/inward/record.url?scp=2642563814&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=2642563814&partnerID=8YFLogxK

U2 - 10.1109/TMAG.2004.826904

DO - 10.1109/TMAG.2004.826904

M3 - Article

AN - SCOPUS:2642563814

SN - 0018-9464

VL - 40

SP - 1738

EP - 1743

JO - IEEE Transactions on Magnetics

JF - IEEE Transactions on Magnetics

IS - 3

ER -

Run-length-limited low-density parity check codes based on deliberate error insertion

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this