Abstract
In recent years, acoustic microscopy has been found to be very useful for characterizing engineering as well as biologic materials. With the present state of knowledge on acoustic microscopy, one can obtain the surface wave velocity of a homogeneous specimen or coating thickness of a coated material and produce images of near surface internal defects and inhomogeneities in a specimen. Applications of acoustic microscopy for obtaining material properties of anisotropic specimens and detecting material defects at a greater depth are meager because commercially available acoustic microscopes are insensitive to direction-dependent material properties and they, in general, have poor penetration properties because of high operating frequencies. Recently at the University of Arizona an unconventional low frequency (0.5-2.5 MHz) acoustic microscope has been fabricated where the microscope lens has been replaced by two ultrasonic transducers with cylindrical concave faces; one works as a transmitter and the other one works as a receiver. Using this arrangement, it has been found that it is possible to detect internal damages in a material and identify material anisotropy in fiber-reinforced composite plates. These capabilities of the microscope are demonstrated in this paper by presenting some experimental results along with theoretical justifications. Then pattern recognition techniques are used to solve the inverse problem, that is, to predict the type of material defect from reflected acoustic signals.
Original language | English (US) |
---|---|
Pages (from-to) | 19-28 |
Number of pages | 10 |
Journal | Journal of Nondestructive Evaluation |
Volume | 11 |
Issue number | 1 |
DOIs | |
State | Published - Mar 1992 |
Keywords
- Acoustic microscopy
- composite solid
- damage
- defect
- linear filters
- pattern recognition
- ultrasonic signal
ASJC Scopus subject areas
- Mechanics of Materials
- Mechanical Engineering