Fabrication of two-dimensional photonic crystals with embedded defects using blue-laser-writer and holography

Tao Liu; Mahmoud Fallahi; Jerome V. Moloney; Masud Mansuripur

doi:10.1016/j.mee.2005.12.024

Fabrication of two-dimensional photonic crystals with embedded defects using blue-laser-writer and holography

Tao Liu, Mahmoud Fallahi, Jerome V. Moloney, Masud Mansuripur

Research output: Contribution to journal › Article › peer-review

3 Scopus citations

Abstract

We have demonstrated an approach of relatively rapid fabrication of two-dimensional photonic crystals with embedded defects by combining a custom-built blue-laser-writer and the technique of optical holography. The blue-laser-writer is used to define various defect patterns first, and then the optical holography is used to create two-dimensional photonic crystals on the samples with the pre-defined defects. A beam splitter was fabricated based on this new method and characterized.

Original language	English (US)
Pages (from-to)	1778-1781
Number of pages	4
Journal	Microelectronic Engineering
Volume	83
Issue number	4-9 SPEC. ISS.
DOIs	https://doi.org/10.1016/j.mee.2005.12.024
State	Published - Apr 2006

Keywords

Beam splitter
Optical waveguide
Photonic crystal

ASJC Scopus subject areas

Electronic, Optical and Magnetic Materials
Atomic and Molecular Physics, and Optics
Condensed Matter Physics
Surfaces, Coatings and Films
Electrical and Electronic Engineering

Access to Document

10.1016/j.mee.2005.12.024

Cite this

@article{35cf6c2498234ed1bb514313dd0cf506,

title = "Fabrication of two-dimensional photonic crystals with embedded defects using blue-laser-writer and holography",

abstract = "We have demonstrated an approach of relatively rapid fabrication of two-dimensional photonic crystals with embedded defects by combining a custom-built blue-laser-writer and the technique of optical holography. The blue-laser-writer is used to define various defect patterns first, and then the optical holography is used to create two-dimensional photonic crystals on the samples with the pre-defined defects. A beam splitter was fabricated based on this new method and characterized.",

keywords = "Beam splitter, Optical waveguide, Photonic crystal",

author = "Tao Liu and Mahmoud Fallahi and Moloney, {Jerome V.} and Masud Mansuripur",

note = "Funding Information: This research was supported under AFOSR contract No. F49620-02-1-0380 awarded by the Joint Technology Office, by the AFOSR contract No. FA9550-04-1-0213, and, in part, by the National Science Foundation STC Program, under Agreement No. DMR-0120967.",

year = "2006",

month = apr,

doi = "10.1016/j.mee.2005.12.024",

language = "English (US)",

volume = "83",

pages = "1778--1781",

journal = "Microelectronic Engineering",

issn = "0167-9317",

publisher = "Elsevier B.V.",

number = "4-9 SPEC. ISS.",

}

TY - JOUR

T1 - Fabrication of two-dimensional photonic crystals with embedded defects using blue-laser-writer and holography

AU - Liu, Tao

AU - Fallahi, Mahmoud

AU - Moloney, Jerome V.

AU - Mansuripur, Masud

N1 - Funding Information: This research was supported under AFOSR contract No. F49620-02-1-0380 awarded by the Joint Technology Office, by the AFOSR contract No. FA9550-04-1-0213, and, in part, by the National Science Foundation STC Program, under Agreement No. DMR-0120967.

PY - 2006/4

Y1 - 2006/4

N2 - We have demonstrated an approach of relatively rapid fabrication of two-dimensional photonic crystals with embedded defects by combining a custom-built blue-laser-writer and the technique of optical holography. The blue-laser-writer is used to define various defect patterns first, and then the optical holography is used to create two-dimensional photonic crystals on the samples with the pre-defined defects. A beam splitter was fabricated based on this new method and characterized.

AB - We have demonstrated an approach of relatively rapid fabrication of two-dimensional photonic crystals with embedded defects by combining a custom-built blue-laser-writer and the technique of optical holography. The blue-laser-writer is used to define various defect patterns first, and then the optical holography is used to create two-dimensional photonic crystals on the samples with the pre-defined defects. A beam splitter was fabricated based on this new method and characterized.

KW - Beam splitter

KW - Optical waveguide

KW - Photonic crystal

UR - http://www.scopus.com/inward/record.url?scp=33646068082&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33646068082&partnerID=8YFLogxK

U2 - 10.1016/j.mee.2005.12.024

DO - 10.1016/j.mee.2005.12.024

M3 - Article

AN - SCOPUS:33646068082

SN - 0167-9317

VL - 83

SP - 1778

EP - 1781

JO - Microelectronic Engineering

JF - Microelectronic Engineering

IS - 4-9 SPEC. ISS.

ER -

Fabrication of two-dimensional photonic crystals with embedded defects using blue-laser-writer and holography

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this