TY - JOUR
T1 - Cokriging estimation of the conductivity field under variably saturated flow conditions
AU - Li, Bailing
AU - Yeh, T. C.Jim
PY - 1999/12
Y1 - 1999/12
N2 - A linear estimator, cokriging, was applied to estimate hydraulic conductivity, using pressure head, solute concentration, and solute arrival time measurements in a hypothetical, heterogeneous vadose zone under steady state infiltrations at different degrees of saturation. Covariances and cross-covariances required by the estimator were determined by a first-order approximation in which sensitivity matrices were calculated using an adjoint state method. The effectiveness of the pressure, concentration, and arrival time measurements for the estimator were then evaluated using two statistical criteria, L1 and L2 norms, i.e., the average absolute error and the mean square error of the estimated conductivity field. Results of our analysis showed that pressure head measurements at steady state flow provided the best estimation of hydraulic conductivity among the three types of measurements. In addition, head measurements of flow near saturation were found more useful for estimating conductivity than those at low saturations. The arrival time measurements do not have any significant advantage over concentration. Factors such as variability, linearity, and ergodicity were discussed to explain advantage and limitation of each type of data set. Finally, to take advantage of different types of data set (e.g., head and concentration), a computationally efficient estimation approach was developed to combine them sequentially to estimate the hydraulic conductivity field. The conductivity field estimated by using this sequential approach proves to be better than all the previous estimates, using one type of data set alone.
AB - A linear estimator, cokriging, was applied to estimate hydraulic conductivity, using pressure head, solute concentration, and solute arrival time measurements in a hypothetical, heterogeneous vadose zone under steady state infiltrations at different degrees of saturation. Covariances and cross-covariances required by the estimator were determined by a first-order approximation in which sensitivity matrices were calculated using an adjoint state method. The effectiveness of the pressure, concentration, and arrival time measurements for the estimator were then evaluated using two statistical criteria, L1 and L2 norms, i.e., the average absolute error and the mean square error of the estimated conductivity field. Results of our analysis showed that pressure head measurements at steady state flow provided the best estimation of hydraulic conductivity among the three types of measurements. In addition, head measurements of flow near saturation were found more useful for estimating conductivity than those at low saturations. The arrival time measurements do not have any significant advantage over concentration. Factors such as variability, linearity, and ergodicity were discussed to explain advantage and limitation of each type of data set. Finally, to take advantage of different types of data set (e.g., head and concentration), a computationally efficient estimation approach was developed to combine them sequentially to estimate the hydraulic conductivity field. The conductivity field estimated by using this sequential approach proves to be better than all the previous estimates, using one type of data set alone.
UR - http://www.scopus.com/inward/record.url?scp=0033408382&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=0033408382&partnerID=8YFLogxK
U2 - 10.1029/1999WR900268
DO - 10.1029/1999WR900268
M3 - Article
AN - SCOPUS:0033408382
SN - 0043-1397
VL - 35
SP - 3663
EP - 3674
JO - Water Resources Research
JF - Water Resources Research
IS - 12
ER -