Circular hole ENZ photonic crystal fibers exhibit high birefringence

Tianyu Yang, Can Ding, Richard W. Ziolkowski, Y. Jay Guo

Research output: Contribution to journalArticlepeer-review

27 Scopus citations


—A novel photonic crystal fiber (PCF) design that yields very high birefringence is proposed and analyzed. Its significantly enhanced birefringence is achieved by filling selected air holes in the cladding with an epsilon-near-zero (ENZ) material. Extensive simulation results of this asymmetric material distribution in the lower THz range demonstrate that the reported PCF has a birefringence above 0.1 and a loss below 0.01 cm−1 over a wide band of frequencies. Moreover, it exhibits near zero dispersion at 0.75 THz for both the X- and Y-polarization modes and a birefringence equal to 0.28. This THz PCF is then scaled successfully to optical frequencies. While the high birefringence is maintained, this optical PCF has a very high loss in its Y-polarization mode and, consequently, yields single-polarization single-mode (SPSM) propagation, exhibiting near zero dispersion at the optical telecom wavelength of 1.55 μm. The ideal ENZ materials used for these conceptual models are replaced with realistic ones for both the THz and optical PCF designs. With the currently available ENZ materials, the realistic PCFs still have a high birefringence, but with higher losses compared to the idealized results. Future developments of ENZ materials that achieve lower loss properties will mitigate this issue in any frequency band of high interest.

Original languageEnglish (US)
Article number17264
Pages (from-to)17264-17278
Number of pages15
JournalOptics Express
Issue number13
StatePublished - Jun 25 2018

ASJC Scopus subject areas

  • Atomic and Molecular Physics, and Optics


Dive into the research topics of 'Circular hole ENZ photonic crystal fibers exhibit high birefringence'. Together they form a unique fingerprint.

Cite this