Find Scholarly Works

Search results

• 3D imaging spectroscopy for measuring hyperspectral patterns on solid objects

  Kim, M. H., Rushmeier, H., Dorsey, J., Harvey, T. A., Prum, R. O., Kittle, D. S. & Brady, D. J., Jul 2012, In: ACM Transactions on Graphics. 31, 4, 38.

  Research output: Contribution to journal › Article › peer-review
  95 Scopus citations

• 3-D imaging with MDCT

  Rubin, G. D., Mar 2003, In: European Journal of Radiology. 45, SUPPL. 1, p. S37-S41

  Research output: Contribution to journal › Article › peer-review
  75 Scopus citations

• 3-Dimensional thermal analysis and active cooling of short-length high-power fiber lasers

  Li, L., Li, H., Qiu, T., Temyanko, V. L., Morrell, M. M., Schülzgen, A., Mafi, A., Moloney, J. V. & Peyghambarian, N., May 2 2005, In: Optics Express. 13, 9, p. 3420-3428 9 p.

  Research output: Contribution to journal › Article › peer-review
  40 Scopus citations

• 3D Local Earthquake Tomography of the Ecuadorian Margin in the Source Area of the 2016 Mw 7.8 Pedernales Earthquake

  León-Ríos, S., Bie, L., Agurto-Detzel, H., Rietbrock, A., Galve, A., Alvarado, A., Beck, S., Charvis, P., Font, Y., Hidalgo, S., Hoskins, M., Laigle, M., Oregioni, D., Meltzer, A., Ruiz, M. & Woollam, J., Mar 2021, In: Journal of Geophysical Research: Solid Earth. 126, 3, e2020JB020701.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  3 Scopus citations

• 3D-M3: high-spatial-resolution spectroscopy with extreme AO and 3D-printed micro-lenslets

  Anagnos, T., Trappen, M., Kuo Tiong, B. C., Feger, T., Yerolatsitis, S., Harris, R. J., Lozi, J., Jovanovic, N., Birks, T. A., Vievard, S., Guyon, O., Gris-Sánchez, I., Leon-Saval, S. G., Norris, B., Haffert, S. Y., Hottinger, P., Blaicher, M., Xu, Y., Betters, C. H., Koos, C., & 3 othersCoutts, D. W., Schwab, C. & Quirrenbach, A., Jul 1 2021, In: Applied optics. 60, 19, p. D108-D121

  Research output: Contribution to journal › Article › peer-review
  2 Scopus citations

• 3D-MB-MUSE: A robust 3D multi-slab, multi-band and multi-shot reconstruction approach for ultrahigh resolution diffusion MRI

  Bruce, I. P., Chang, H. C., Petty, C., Chen, N. K. & Song, A. W., Oct 1 2017, In: NeuroImage. 159, p. 46-56 11 p.

  Research output: Contribution to journal › Article › peer-review
  24 Scopus citations

• 3D microwave eaton lens fabricated by polymer jetting rapid prototyping

  Du, G., Liang, M., Garcia, R. A. S., Liu, C. & Xin, H., Nov 12 2014, 2014 USNC-URSI Radio Science Meeting (Joint with AP-S Symposium), USNC-URSI 2014 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 267 1 p. 6955650. (2014 USNC-URSI Radio Science Meeting (Joint with AP-S Symposium), USNC-URSI 2014 - Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D mixing in hot jupiters atmospheres: I. application to the day/night cold trap in hd 209458b

  Parmentier, V., Showman, A. P. & Lian, Y., 2013, In: Astronomy and astrophysics. 558, A91.

  Research output: Contribution to journal › Article › peer-review
  206 Scopus citations

• 3D modeling of accretion shocks in young stellar objects: Simulation of laboratory experiments

  Ibgui, L., González, M., Stehlé, C., Hubeny, I. & Lanz, T., 2012, ECLA - European Conference on Laboratory Astrophysics. p. 149-154 6 p. (EAS Publications Series; vol. 58).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D modeling of patient-specific geometries of portal veins using MR images

  Yang, Y., George, S., Martin, D. R., Tannenbaum, A. R. & Giddens, D. P., 2006, 28th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS'06. p. 5290-5293 4 p. 4030084. (Annual International Conference of the IEEE Engineering in Medicine and Biology - Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  7 Scopus citations

• 3-D Modelling of cosmetic-ray transport in the heliosphere: Toward solar maximum

  Kóta, J. & Jokipii, J. R., 2001, In: Advances in Space Research. 27, 3, p. 529-534 6 p.

  Research output: Contribution to journal › Article › peer-review
  12 Scopus citations

• 3D morphometric analysis of normal sacroiliac joints: A new classification of surface shape variation and the potential implications in pain syndromes

  Jesse, M. K., Kleck, C., Williams, A., Petersen, B., Glueck, D., Lind, K. & Patel, V., 2017, In: Pain physician. 20, 5, p. E701-E709

  Research output: Contribution to journal › Article › peer-review
  8 Scopus citations

• 3D Nanophotonic device fabrication using discrete components

  Melzer, J. E. & McLeod, E., Jun 1 2020, In: Nanophotonics. 9, 6, p. 1373-1390 18 p.

  Research output: Contribution to journal › Review article › peer-review

  Open Access
  10 Scopus citations

• 3D nanophotonic systems for biosensing and integrated photonics

  McLeod, E., 2017, Frontiers in Optics, FiO 2017. OSA - The Optical Society, (Optics InfoBase Conference Papers; vol. Part F66-FiO 2017).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D-NoC: Reconfigurable 3D photonic on-chip interconnect for multicores

  Morris, R., Kodi, A. K. & Louri, A., 2012, 2012 IEEE 30th International Conference on Computer Design, ICCD 2012. p. 413-418 6 p. 6378672. (Proceedings - IEEE International Conference on Computer Design: VLSI in Computers and Processors).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  12 Scopus citations

• 3D Observations of Fracturing in Rock-Backfill Composite Specimens Under Triaxial Loading

  Yu, X., Kemeny, J., Li, J., Song, W. & Tan, Y., Dec 2021, In: Rock Mechanics and Rock Engineering. 54, 12, p. 6009-6022 14 p.

  Research output: Contribution to journal › Article › peer-review
  4 Scopus citations

• 3D Optical Elements for Computational Sensors

  Brady, D. J., 2003, In: OSA Trends in Optics and Photonics Series. 88, p. 1949-1951 3 p.

  Research output: Contribution to journal › Conference article › peer-review

• 3D Optical Elements for Computational Sensors

  Brady, D. J., 2003, Conference on Lasers and Electro-Optics, CLEO 2003. Optica Publishing Group (formerly OSA), CFE3. (Optics InfoBase Conference Papers).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D Optical Interconnects for High-Speed Interchip and Interboard Communications

  Sung, H. & Louri, A., Oct 1994, Computer, 27, 10, p. 27-37 11 p.

  Research output: Contribution to specialist publication › Article
  15 Scopus citations

• 3-D optical lattices for cesium atoms

  Kastberg, A., Jessen, P. S., Phillips, W. D., Rolston, S. L. & Spreeuw, R. J. C., 1994.

  Research output: Contribution to conference › Paper › peer-review

• 3D Oral and Cervical Tissue Models for Studying Papillomavirus Host-Pathogen Interactions

  Jackson, R., Maarsingh, J. D., Herbst-Kralovetz, M. M. & Van Doorslaer, K., Dec 2020, In: Current Protocols in Microbiology. 59, 1, e129.

  Research output: Contribution to journal › Article › peer-review
  7 Scopus citations

• 3-D photoacoustic and pulse echo imaging of prostate tumor progression in the mouse window chamber

  Bauer, D. R., Olafsson, R., Montilla, L. G. & Witte, R. S., Feb 2011, In: Journal of biomedical optics. 16, 2, 026012.

  Research output: Contribution to journal › Article › peer-review
  36 Scopus citations

• 3D Position Estimation for the AdaptiSPECT-C Modular Gamma-Ray Cameras

  Doty, K. J., Kupinski, M. A., Richards, R. G., Ruiz-Gonzalez, M., King, M. A., Kuo, P. H. & Furenlid, L. R., 2021, 2021 IEEE Nuclear Science Symposium and Medical Imaging Conference Record, NSS/MIC 2021 and 28th International Symposium on Room-Temperature Semiconductor Detectors, RTSD 2022. Tomita, H. & Nakamura, T. (eds.). Institute of Electrical and Electronics Engineers Inc., (2021 IEEE Nuclear Science Symposium and Medical Imaging Conference Record, NSS/MIC 2021 and 28th International Symposium on Room-Temperature Semiconductor Detectors, RTSD 2022).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D printable multilayer phased array design

  Yu, X., Liang, M., Shemelya, C., Wicker, R., Macdonaldand, E. & Xin, H., Oct 21 2015, 2015 USNC-URSI Radio Science Meeting (Joint with AP-S Symposium), USNC-URSI 2015 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 351 1 p. 7303635. (2015 USNC-URSI Radio Science Meeting (Joint with AP-S Symposium), USNC-URSI 2015 - Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D printable multilayer RF integrated system

  Yu, X., Liang, M., Shemelya, C., Wicker, R., MacDonald, E. & Xin, H., 2015, In: Proceedings of the International Telemetering Conference. 82, p. 928-933 6 p.

  Research output: Contribution to journal › Article › peer-review

• 3D printed antennas for wireless communication

  Johnson, B., Madrid, C., Yiin, K., Wang, H., Li, C., Tan, X., Marcellin, M. W. & Xin, H., 2015, Proceedings of the International Telemetering Conference. International Foundation for Telemetering, Vol. 82. p. 934-943 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D-printed biopolymers for tissue engineering application

  Li, X., Cui, R., Sun, L., Aifantis, K. E., Fan, Y., Feng, Q., Cui, F. & Watari, F., 2014, In: International Journal of Polymer Science. 2014, 829145.

  Research output: Contribution to journal › Review article › peer-review
  134 Scopus citations

• 3D printed dielectric reflectarrays: Low-cost high-gain antennas at sub-millimeter waves

  Nayeri, P., Liang, M., Sabory-Garcia, R. A., Tuo, M., Yang, F., Gehm, M., Xin, H. & Elsherbeni, A. Z., Apr 2014, In: IEEE Transactions on Antennas and Propagation. 62, 4, p. 2000-2008 9 p., 6728704.

  Research output: Contribution to journal › Article › peer-review
  223 Scopus citations

• 3D printed electronics with high performance, multi-layered electrical interconnect

  Kim, C., Espalin, D., Liang, M., Xin, H., Cuaron, A., Varela, I., Macdonald, E. & Wicker, R. B., 2017, In: IEEE Access. 5, p. 25286-25294 9 p., 8107678.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  50 Scopus citations

• 3D printed lens for depth of field imaging

  Kiekens, K. C. & Barton, J. K., Nov 15 2019, In: OSA Continuum. 2, 11, p. 3019-3025 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Scopus citations

• 3D printed micro lenses for depth of focus imaging

  Kiekens, K. C., Vega, D., Coompson, J., Xin, H. & Barton, J. K., 2019, Optical Fabrication and Testing, OFT 2019. OSA - The Optical Society, (Optics InfoBase Conference Papers; vol. Part F161-OFT 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D printed micro lenses for depth of focus imaging

  Kiekens, K. C., Vega, D., Coompson, J., Xin, H. & Barton, J. K., Jun 3 2019, Optical Fabrication and Testing - Proceedings Optical Design and Fabrication 2019 (Freeform, OFT). Optical Society of America (OSA), (Optical Fabrication and Testing - Proceedings Optical Design and Fabrication 2019 (Freeform, OFT)).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• 3D printed microwave and THz components

  Liang, M. & Xin, H., Feb 18 2016, 2015 Asia-Pacific Microwave Conference, APMC 2015 - Proceedings. Meng, F., Hong, W., Zhu, X-W., Yang, G-Q. & Song, Z. (eds.). Institute of Electrical and Electronics Engineers Inc., 7413206. (Asia-Pacific Microwave Conference Proceedings, APMC; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Scopus citations

• 3-D printed microwave patch antenna via fused deposition method and ultrasonic wire mesh embedding technique

  Liang, M., Shemelya, C., MacDonald, E., Wicker, R. & Xin, H., 2015, In: IEEE Antennas and Wireless Propagation Letters. 14, p. 1346-1349 4 p., 7046266.

  Research output: Contribution to journal › Article › peer-review
  76 Scopus citations

• 3D printed mitral valve models: affordable simulation for robotic mitral valve repair

  Premyodhin, N., Mandair, D., Ferng, A. S., Leach, T. S., Palsma, R. P., Albanna, M. Z. & Khalpey, Z. I., Jan 1 2018, In: Interactive cardiovascular and thoracic surgery. 26, 1, p. 119-123 5 p.

  Research output: Contribution to journal › Article › peer-review
  16 Scopus citations

• 3D printed multilayer microstrip line structure with vertical transition toward integrated systems

  Liang, M., Yu, X., Shemelya, C., Macdonald, E. & Xin, H., Jul 24 2015, 2015 IEEE MTT-S International Microwave Symposium, IMS 2015. Institute of Electrical and Electronics Engineers Inc., 7167016. (2015 IEEE MTT-S International Microwave Symposium, IMS 2015).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  18 Scopus citations

• 3-D Printed Parts for a Multilayer Phased Array Antenna System

  Yu, X., Liang, M., Shemelya, C., Roberson, D. A., Wicker, R., MacDonald, E. & Xin, H., Nov 2018, In: IEEE Antennas and Wireless Propagation Letters. 17, 11, p. 2150-2154 5 p., 8477114.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  13 Scopus citations

• 3D-Printed Phase Controlled Focusing Metalens at 1550 nm Wavelength

  Coompson, J., Liang, M., Auginash, C., Gin, A., Yang, M., Qu, Z., Djordjevic, I. B. & Xin, H., 2018, 2018 IEEE Antennas and Propagation Society International Symposium and USNC/URSI National Radio Science Meeting, APSURSI 2018 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 1685-1686 2 p. 8608672. (2018 IEEE Antennas and Propagation Society International Symposium and USNC/URSI National Radio Science Meeting, APSURSI 2018 - Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Scopus citations

• 3D-printed tubes with complex internal fins for heat transfer enhancement-CFD analysis and performance evaluation

  Wei, C., Diaz, G. A. V., Wang, K. & Li, P., 2020, In: AIMS Energy. 8, 1, p. 27-47 21 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  2 Scopus citations

• 3-D Printing Implementation of an X-band Eaton Lens for Beam Deflection

  Du, G., Liang, M., Sabory-Garcia, R. A., Liu, C. & Xin, H., 2016, In: IEEE Antennas and Wireless Propagation Letters. 15, p. 1487-1490 4 p., 7370756.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  38 Scopus citations

• 3D printing in X-ray and gamma-ray imaging: A novel method for fabricating high-density imaging apertures

  Miller, B. W., Moore, J. W., Barrett, H. H., Fryé, T., Adler, S., Sery, J. & Furenlid, L. R., Dec 11 2011, In: Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 659, 1, p. 262-268 7 p.

  Research output: Contribution to journal › Article › peer-review
  64 Scopus citations

• 3D printing multi-functionality: Embedded RF antennas and components

  Shemelya, C. M., Zemba, M., Liang, M., Espalin, D., Kief, C., Xin, H., Wicker, R. B. & MacDonald, E. W., Aug 27 2015, 2015 9th European Conference on Antennas and Propagation, EuCAP 2015. Institute of Electrical and Electronics Engineers Inc., 7228805. (2015 9th European Conference on Antennas and Propagation, EuCAP 2015).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  16 Scopus citations

• 3D printing optics with hybrid material

  Kang, W., Hong, Z. & Liang, R., Mar 1 2021, In: Applied optics. 60, 7, p. 1809-1813 5 p.

  Research output: Contribution to journal › Article › peer-review
  4 Scopus citations

• 3D printing technology for RF and THz antennas

  Liang, M., Wu, J., Yu, X. & Xin, H., Jan 17 2017, ISAP 2016 - International Symposium on Antennas and Propagation. Institute of Electrical and Electronics Engineers Inc., p. 536-537 2 p. 7821190. (ISAP 2016 - International Symposium on Antennas and Propagation).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  26 Scopus citations

• 3D propagation of relativistic solar protons through interplanetary space

  Dalla, S., De Nolfo, G. A., Bruno, A., Giacalone, J., Laitinen, T., Thomas, S., Battarbee, M. & Marsh, M. S., Jul 1 2020, In: Astronomy and astrophysics. 639, A105.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  9 Scopus citations

• 3D proportional contact representations of graphs

  Alam, M. J., Kobourov, S. G., Liotta, G., Pupyrev, S. & Veeramoni, S., 2014, IISA 2014 - 5th International Conference on Information, Intelligence, Systems and Applications. IEEE Computer Society, p. 27-32 6 p. 6878773. (IISA 2014 - 5th International Conference on Information, Intelligence, Systems and Applications).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Scopus citations

• 3D QSPR models for the removal of trace organic contaminants by ozone and free chlorine

  Lei, H. & Snyder, S. A., Oct 2007, In: Water research. 41, 18, p. 4051-4060 10 p.

  Research output: Contribution to journal › Article › peer-review
  69 Scopus citations

• 3D radar wavefield migration of comet interiors

  Sava, P. & Asphaug, E., Sep 1 2018, In: Advances in Space Research. 62, 5, p. 1146-1164 19 p.

  Research output: Contribution to journal › Article › peer-review
  6 Scopus citations

• 3D radar wavefield tomography of comet interiors

  Sava, P. & Asphaug, E., Apr 15 2018, In: Advances in Space Research. 61, 8, p. 2198-2213 16 p.

  Research output: Contribution to journal › Article › peer-review
  11 Scopus citations

• 3D rapid prototyping of terahertz computer-generated volume holograms

  Ng, W., Golish, D. R., Xin, H. & Gehm, M. E., 2012, IRMMW-THz 2012 - 37th International Conference on Infrared, Millimeter, and Terahertz Waves. 6380442. (International Conference on Infrared, Millimeter, and Terahertz Waves, IRMMW-THz).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution